海洋工程和船舶焊接变形预测方法研究

目前,影响海洋工程和船舶焊接结构质量的重要影响因素之一就是焊接变形,其产生的根本原因就是在焊接过程中因结构体受热不均、热梯度、残余应力等。基于此,本文对焊接变形预测的理论发展进程及其相关理论内涵进行详细阐述,并对基于神经网络的新型焊接变形预测理论的研究发展简单概述。     

Surface Profile Optimization of Yankee Dryer Based on Finite Element Analysis

The deformation and stress distribution of cast iron Yankee dryer caused by outside linear load， inside steam pressure and self-gravity were calculated by numerical simulation with ANSYS software. The deformation curve of the linear load area was obtained and compared with the deformation in the actual working process. The surface profile of dryer was optimized and the deformation and stress of the optimized dryer were calculated and compared with the that of before optimization. In this paper， the method of the surface profile optimization of Yankee dryer was presented．     

基于现场监测与数值模拟的浅层采空区稳定性分析

隐患采空区是目前影响露天开采矿山安全生产的主要危害源之一。随着台阶开采的不断剥离,露天开采境界内各台阶与地下空区群的隔离层厚度越来越薄,随时有可能发生采空区顶板坍塌事故。考虑到露天矿采空区地质赋存条件和围岩稳固性等特征,以弓长岭露天铁矿浅层采空区为工程背景,运用现场监测和数值模拟相结合的手段综合分析了浅层采空区的稳定性。将液体静力水准地表沉降监测系统的监测数据与FLAC数值模拟结果对比,调整蠕变参数使得数值模拟的蠕变速率与现场监测结果一致,而后据此进行未来结果的预测。最终根据地表沉降数据确定的蠕变参数取值为A=1.0×10^-12、m=1.75、n=0.35。研究表明:静力水准测点地表最大沉降位移为-9.8 mm,蠕变计算结果顶板最大垂直位移约20.4 mm,应力最大值约25 MPa,综合分析显示该采空区较稳定。上述研究提供了一种基于采空区现场监测数据的数值模拟蠕变分析方法,可为类似矿山采空区稳定性分析提供借鉴。     

煤矿井下风水管路压力在线监测系统的研究与应用

为提高井下管路供风、供水的安全性、可靠性，以工业环网作为网络通信平台，通过分站采集数据上传至地面，实现对煤矿井下供风、供水管道的远程实时监控及远程控制，及时发现管网故障，提高维护效率、降低损失，保障供风、供水质量，达到科学预警、降低成本、提高效率的目的。     

Flame Front Deformation Instabilities of Filtration Combustion for Initial Thermal Perturbation

The flame front deformation instability of low-velocity filtration combustion within an inert packed bed is studied based on the initial preheating non-uniformity. Based on the experimental phenomena, an initial thermal perturbation model is numerically proposed so as to predict the deformation behaviors of the flame front instabilities. The numerical prediction indicates that the assumption of an initial thermal perturbation is a feasible explanation as the cause of the flame front inclination instability. As the initial thermal perturbation increases, the phenomena of the flame front break and shrinking instabilities could easily occur at high filtration velocity or low equivalence ratio. Moreover, the evolutions of the flame front break rate and the shrinking rate are quantitatively analyzed.     

2种灰色模型在矿区地表沉陷预计中的适用性

目前矿区地表单点沉陷动态预计方法主要基于传统的水准测量数据,监测方法单一,成本高,观测点易破坏,不能保证地表形变信息的实时性,且采用灰色模型进行地表沉陷预计时只针对单一模型的应用,没有结合模型自身特点分析其适用性。以袁店二矿7221工作面为试验区域,采用合成孔径雷达差分干涉测量技术监测矿区地表沉陷量,分别建立了描述沉陷量与时间关系的GM(1,1)与灰色Verhulst模型进行地表沉陷量预计,实现了矿区地表沉陷监测与动态预计一体化。通过比较、分析GM(1,1)与灰色Verhulst模型对地表沉陷量的拟合及预计结果,得出了2种灰色模型在矿区地表沉陷预计中的适用性:在矿区开采沉陷开始至活跃前期,若地表单点沉陷量曲线呈近似单峰型,则宜采用GM(1,1)进行短期预计;当矿区地表沉陷进入衰退阶段,单点沉陷量曲线呈平底饱和状态,则宜采用灰色Verhulst模型进行中长期预计。     

New observations and critical assessments of incipient plasticity events and indentation size effect in nanoindentation of ceramic nanocomposites

The ceramic nanocomposites (CNCs) like zirconia toughened alumina (ZTA) ceramics are important futuristic materials for structural and functional applications in advanced strategic systems, structural components, biomedical prostheses and devices. In all structural materials including the ZTA CNCs, the very early stages of plastic deformation i.e., the incipient plasticity events (IPE) are most important to be understood so that the microstructure and mechanical properties can be tuned to suit a given end application. Here we report for the first time the mechanisms of IPE in the nanoindentation experiments conducted at 10–1000 mN loads in the 40 ZTA CNCs. Here 40 ZTA CNC stands for 40 vol% of 3 mol% Yttria partially stabilized zirconia toughened alumina (40ZTA) CNC. The role of load ranges in variations of the IPE related parameters in the 40 ZTA CNCs is also studied. Further, an attempt is made to assess how the amount of zirconia content in ZTA CNCs affects the variations of the IPE related parameters. Through the extensive usage of field emission scanning electron microscopy (FESEM) and theoretical estimations, efforts are also directed to check out the linkage, if any, between the localized shear deformation and/or microcracking with the IPE events that occur in the present CNCs. In addition, a new concept of damage resistance is introduced for the first time in the present work to explain the presence of a strong indentation size effect (ISE) in the 40 ZTA CNCs. Finally, an attempt is also directed to understand how the indentation load (P) controls the relative size of interaction zones of dislocation loops as well as the damage resistance and thereby, engineer the acuteness of the ISE in ZTA CNCs. The implication of these findings in futuristic design of especially the ZTA CNCs for various applications is also discussed.     

Size-dependent separation of graphene oxide by deformation of packed-gel in a chromatographic column

ABSTRACT

A deformable gel-packed chromatographic column was used to separate as-synthesized graphite oxide with different sizes. The synthesized gel (56 µm) was deformed by pressure of the fluid flow and the gaps in the gels showed a range of sizes. A suspension of graphene oxide (0.1 g/L, 10 mL) was injected, and graphene oxide in the elution had a size at 0.56 μm and 0.14 μm, whereas in half upper and bottom domain of the gel layer graphene oxide had a size at 33 µm and 2.9 µm, respectively, demonstrating that graphene oxide suspension was separated by size through gel layer.     

7075铝合金热变形连接接头的组织与性能

应用Gleeble-3500热模拟机对7075铝合金进行了热变形连接试验,利用金相显微镜和扫描电镜对不同温度和保温时间的接头界面组织进行了观察和分析,并对接头进行了拉伸性能测试。结果表明:当连接温度为460 ℃,保温时间为24 h时,对界面进行EDS分析,界面处已经没有氧化物的偏聚,此时的力学性能最佳,抗拉强度达到444 MPa,屈服强度为265 MPa。     

小型特种精细化工过程自动化和信息化研究发展趋势探讨

针对采取小批量间歇性批次生产方式、工艺介质腐蚀性强、危险性大的小型特种精细化工生产工艺研究试验过程自动化、信息化程度不高，导致工艺研究试验中获取数据较少、过程机理研究不够透彻、人工操作多、安全风险高、研究试验消耗大及效率不高等问题，综述了期待通过智能控制、在线分析、模拟仿真和虚拟制造、工况监测及预测性维护以及信息管理和生产调度等关键技术的研究和应用，提高小型特种精细化工生产工艺过程的自动化和信息化程度，实现小型特种精细化工生产工艺过程的数字化、虚拟化和智能化，降低生产安全风险和试验消耗，提高小型特种精细化工生产工艺研究试验的成功率和效率，达到小型特种精细化工生产工艺过程的数字化设计和精准生产的目标。